Cheddar Slot Car - Home
About Cheddar Slot Car Centre
About Digital Slot Car Racing
Scalextric en España / Videos
Circuit Design
Converting to Digital Scalextric
Organising meetings
Chipping saloon cars
Chipping a single-seater
Repairs and maintenance
Service Sheets
Digital racecraft and rules
Some SSD circuits
Advanced SSD
Promotional video
Links and information
On-line digital racing
Rural Racer
Recycling (WEEE) and environmental

Updates via Twitter
Digital Rock for racing to

Scalextric Lamborghini Gallardo "Flatex" C3078   £28.95   info... Scalextric Porsche 997 (green) C3074   £22.95   info... Slot.It Ferrari F40 Le Mans 1995 Kit SIKF02D   £47.95   info... Scalextric Nissan GT-R (white) C3072   £23.50   info... Slot.It Ferrari 312 PB Monza 1972 Kit SIKF01D   £47.95   info... Scalextric Mercedes-Benz SLR McLaren 722 GT C3010   £32.95   info... Scalextric Ferrari F430 (light blue) C3067   £22.95   info... Scalextric Peugeot 908 HDI FAP 2009 C3011   £32.95   info...

Scalextric Digital track pieces

Slotcarcentre > Track and borders > Scalextric Digital track pieces

Digital track pieces Below are the special Scalextric track pieces you can use on digital circuits - these are the ones that sort out your overtaking, pit lanes and so on. For the rest of the track, ordinary straights, curves, etc., hop over to the Sport Track section. Unlike some other brands, Scalextric Digital track pieces are completely compatible with the rest of the same brand of track - it is not a separate track system.

About pit lanes We are often asked - what can you do with a pit lane on Scalextric Digital? It serves two purposes. Firstly, you can use these pieces to expand your track to three or more racing lanes wide, at any point on the circuit. It doesn't have to be just used as a pit lane. But as an actual pit lane, it can either be "passive", that is to say, you just use it for somewhere to park cars that are not racing. Or, if you want an active pit lane to use for stops during races, then you can either use it with the Pit Lane Game C7041, or you can use it in conjunction with a 6-car powerbase or PB-Pro connected to SSD software (see our software page). These software packages will provide you with comprehensive pit stop and fuel management options to add to your SSD races. Scalextric pit stop software such as Sport World or old-style analogue RMS is not compatible with Digital.

Related products: 1. Scalextric Single lane half-straights (4) (Ref: C7016) Scalextric Pit Lane entry/exit (on left)   Ref: C7014 Two forked track sections (points, if you like) with borders and barriers, that branch your pit lane off the main track and bring it back on ... C7014: more info… £38.95 (€44.88) People who bought this item also bought: 1. Scalextric Standard straights (2) (Ref: C8205) 2. Scalextric Single lane half-straights (4) (Ref: C7016) 3. Scalextric Extension pack 3 (Ref: C8512)

Related products: 1. Scalextric Single lane half-straights (4) (Ref: C7016) Scalextric Pit Lane entry/exit (on right)   Ref: C7015 Same as C7014, two forked pit entry and exit track pieces - plus borders and barriers - to make a third racing or pit lane. Again ... C7015: more info… £38.95 (€44.88) Availability: Out of Stock OUT OF STOCK [earliest stock due: 16/08/2010] People who bought this item also bought: 1. Scalextric Single lane half-straights (4) (Ref: C7016) 2. Scalextric Single Lane Curved track 22.5 degree (4) (Ref: C7017) 3. Scalextric Straight crossover Lanechanger (Ref: C7036)

Scalextric Single lane half-straights (4)   Ref: C7016 Pack of 4, you need 3 of these to go alongside a pit lane piece, i.e. you will need two packs to go with your C7014 ... C7016: more info... £7.50 (€8.64) Availability: Limited Stock People who bought this item also bought: 1. Scalextric Single Lane Curved track 22.5 degree (4) (Ref: C7017) 2. Scalextric Standard straights (2) (Ref: C8205) 3. Scalextric Pit Lane entry/exit (on right) (Ref: C7015)

Scalextric Single Lane Curved track 22.5 degree (4)   Ref: C7017 One of these fits exactly round the outside of a half-R2 (C8234) C7017: more info… £8.95 (€10.31) Availability: Out of Stock OUT OF STOCK [earliest stock due: 05/04/2010] People who bought this item also bought: 1. Scalextric Single lane half-straights (4) (Ref: C7016) 2. Scalextric Pit Lane entry/exit (on right) (Ref: C7015) 3. Scalextric Quarter Straight (2) 87mm (Ref: C8200)

Scalextric Single Lane Curved border 22.5 degree (4)   Ref: C7019 This is the border section that goes round the outside of the C7017 as shown. C7019: more info… £5.95 (€6.86) People who bought this item also bought: 1. Scalextric Single Lane Curved track 22.5 degree (4) (Ref: C7017) 2. Scalextric Single lane half-straights (4) (Ref: C7016) 3. Scalextric Pit Lane entry/exit (on right) (Ref: C7015)

Scalextric Grid Straights (2)   Ref: C7018 An absolute must for your digital circuit, this pack of two grid half straights provides four staggered grid positions. If you are racing 6 cars on ... C7018: more info… £7.25 (€8.35) People who bought this item also bought: 1. Scalextric Radius 2 standard curve (2) (Ref: C8206) 2. Scalextric Radius 1 curve, 45 degrees (2) (Ref: C8202) 3. Scalextric Quarter Straight (2) 87mm (Ref: C8200)

Which lanechanger??!! We are often asked for our advice on choosing and siting lanechangers. Try and use both types - don't worry that the corner lanechanger only goes one way, you will find it makes no difference to the racing. Here are some ideas for a clockwise circuit. Straight lanechangers; one at the start and/or end of your main straight is good. Forces you to either make an early choice to pull out and out-drag your opponent to the corner ahead, or leave it to the last minute to cheekily duck out from behind him. You can also place odd ones anywhere on the circuit you have a 1.5 straight section. Don't place them directly after one an other though, human reactions are not fast enough to properly take advantage of them, you will just end up with pile-ups. Corner lanechangers; last corner of the lap, an out-to-in to give a chasing car a chance to get up the inside down to the first corner. First corner of the lap, another out-to-in to give a car a chance to cut in to the inside and block an opponent's overtaking move. Elsewhere, try and alternate lanechangers to give a chance to swap from each lane in turn - nothing more frustrating than being stuck behind someone for several corners waiting for the next lanechanger in your favour! Please note that each corner lanechanger can only function in its intended configuration; you can't (easily) turn a left hand one into a right hand one due to the way the flippers work and how the connecting plugs fit. These are just suggestions. As you can see from layouts and pictures elsewhere on our site, you can do even more creative things, if you expand to three lanes in places using the pitlane lanechangers!

Scalextric Straight crossover Lanechanger   Ref: C7036 This lanechanger allows you to swap from either lane, and is equivalent to 1.5 regular straights in length. C7036: more info… £32.95 (€37.96) Availability: Out of Stock OUT OF STOCK [earliest stock due: 17/05/2010] People who bought this item also bought: 1. Scalextric Pit Lane entry/exit (on right) (Ref: C7015) 2. Scalextric Radius 2 45 degree outer borders (4) (Ref: C8228) 3. Scalextric Radius 1 curve, 45 degrees (2) (Ref: C8202)

Scalextric Out-to-in-LH Lanechanger   Ref: C7007 Each changer has a half-straight sensor piece which is placed immediately before it, and the curves are of 90 degree "R2" radius. C7007: more info… £22.95 (€26.44) Availability: Limited Stock People who bought this item also bought: 1. Scalextric Radius 1 45 degree outer borders (4) (Ref: C8240) 2. Scalextric Radius 2 45 degree outer borders (4) (Ref: C8228) 3. Scalextric Radius 1 curve, 45 degrees (2) (Ref: C8202)

Scalextric Out-to-in-RH Lanechanger   Ref: C7008 Each changer has a half-straight sensor piece which is placed immediately before it, and the curves are of 90 degree "R2" radius. C7008: more info… £22.95 (€26.44) Availability: Limited Stock People who bought this item also bought: 1. Scalextric Pit Lane entry/exit (on right) (Ref: C7015) 2. Scalextric Standard straights (2) (Ref: C8205) 3. Scalextric Radius 3 curve, 22.5 degrees (2) (Ref: C8204)

Scalextric In-to -out-LH Lanechanger   Ref: C7009 Each changer has a half-straight sensor piece which is placed immediately before it, and the curves are of 90 degree "R2" radius. C7009: more info… £22.95 (€26.44)

Scalextric In-to-out-RH Lanechanger   Ref: C7010 Each changer has a half-straight sensor piece which is placed immediately before it, and the curves are of 90 degree "R2" radius. C7010: more info… £22.95 (€26.44) Availability: Limited Stock People who bought this item also bought: 1. Scalextric Pit Lane entry/exit (on right) (Ref: C7015) 2. Scalextric Standard straights (2) (Ref: C8205) 3. Scalextric Radius 3 curve, 22.5 degrees (2) (Ref: C8204)

Scalextric Radius 2 racing curve crossover (pair), 90 degrees   Ref: C8203 These perform an interesting function on a digital track. Although they come in pairs, if you use them singly, it means that if you stay on ... C8203: more info… £19.95 (€22.99)

Slotcarcentre > Track and borders > Scalextric Digital track pieces